Mehta Tubes Limited Chennai, Tamil Nadu

Send SMS
Contact Us

Copper Tubes

Copper Tubes

Copper Tubes

Our range of Copper Tubes For Auto Industries has certain advantages over other metals. Copper had been proved since the early days to have many good attributes including easy bending and high corrosion resistance.

Copper's inherent superiority in thermal conductivity, corrosion resistance, and strength has made it a preferred primary metal for radiators since the dawn of cars and trucks. Now, with new technologies, it can be used to make smaller, lighter and stronger copper radiators. These copper radiators will be far more environmentally friendly because they are lead-free and easier and cleaner to produce. Additional increased copper content results from a number of accessories being electric instead of hydraulic. Power steering and braking are achieved electrically and the efficiency and performance of these two technologies make them candidates for installation on internal combustion vehicles in the near future. Heating and air conditioning are also achieved electrically and in some cases with a heat pump.

Electric Vehicles and even hybrid electric vehicles will use approximately twice as much copper as conventional vehicles and this will provide the added advantage of excellent recyclables when the vehicle is removed from service.


Additional Information:

Copper Bus Tubes

Copper Bus Tubes

Our range of Copper Bus Tubes For Electrical Application is widely used in the copper tube used for gas, heater and hydraulic lines, oil burners, refrigerators, evaporators and heat exchangers. These copper bus tubes are also used in the hollow (round, square, rectangular and elliptical) electrical conductors in high voltage installation and induction furnaces. Our copper bus tubes range is offered in various specifications as per the application requirement at market leading rates to our clients. As per B.S. 2871 Part - 2/72 C 101
Near Equivalent specification B.S. 1977/ 63 & (ASTM B - 188-81)

Specifications: Copper Bus Tubes for Electrical Application

Physical Properties:

 

Temper

Tensile strength kg/mm2

% Elongation on 5.65 A Min..

Annealed

20.5 to 25.5

40

As drawn (M)

27.50 Min

-

Electrical Conductivity 99.25% I.A.C.S Min. at 20° C (Annealed)

 

 

Chemical Requirements:

 

Copper (Incl. Silver)

99.9% Min.

Lead

0.005%

Total Impurities (Excl. Oxygen)

0.03% Max

 

Marine Applications Copper Tubes

Marine Applications Copper Tubes

We are reckoned amongst the trusted manufacturers and exporters of a wide range of Marine Applications Copper Tubes. These are widely utilized in the design of seawater systems due to their excellent resistance to corrosion and befouling. Copper is widely used in applications like freshwater and seawater supply lines, heat exchangers, condensers, shafting, valve stems, and marine hardware - in which resistance to seawater, hydrated salt deposits, and befouling from marine organisms is important.

Properties of copper:

Copper Tubes

Copper Tubes
  • Copper Tubes
  • Copper Tubes

We offer our clients a wide range of Copper Tubing For Compressed Air Lines that is best known for high operating efficiency, reduction or elimination of harmful emissions. Our range comprises plain tubes, connecting tube coil sets for split ACS, pancake coils single layer, internally grooved tubes and double layer. These copper tubes are widely used in air-conditioning and refrigeration systems due to the inherent properties of the copper metals and their unique abilities to meet the needs of the ACR industry. Our Copper Tubes is offered in various outer diameter, weight, and length as per the application requirement at market leading rates to our clients.

Specifications of ACR product range offered by us are mentioned below:


Weight calculation: (OD-WT) x WT x 0.0281 = KGS/ MTR


Plain Tubes

 

Outer Diameter

4.76mm to 150mm

WT

0.35mm to 3.0mm

Straight length

Upto 6 MTRS

 

Connecting Tube Coil Sets for Split ACS

 

Outer Diameter

4.76mm to 19.05mm

Length

5 MTRS or as per customer's requirement

 

 

Pancake Coils Single Layer

 

Outer Diameter

4.76mm to 19.05mm

Wall

0.41mm & 1.24mm

Length

15 MTRS

 

 

Internally Grooved Tubes

 

Outer Diameter

9.52mm

Wall

0.35mm & 0.30mm

No. of grooves

As per Japanese standards

 


Additional Information:

Heat Exchanger Copper Tube

Heat Exchanger Copper Tube

The Heat Exchanger Copper Tube offered by us have high thermal conductivity, resistance to corrosion and high strength. The copper used for manufacturing these tubes is a preferred primary metal for heat exchangers (radiators) and condensers since the dawn of cars and trucks.

Our copper tubes are also used to make smaller, lighter and stronger copper radiators. These radiators will be far more environmentally friendly because they are lead-free and easier and cleaner to produce. Made with a non-toxic, low temperature allows based on the CuNiSnP system, these can be brazed in the same vacuum and controlled atmosphere furnaces used for aluminum radiators and at the same temperature (approx. 600°C). And since flux isn't present, cleaning after brazing isn't needed and no dangerous metals remain in the brazing material.

Water And Gas Copper Tubes

Water And Gas Copper Tubes

Copper Tube to BS EN 1057 - R250 (Previous Designation BS 2871: Part 1: Table X) Half Hard Straight. Our range of Water And Gas Copper Tubes is offered in 3 or 6 meter straight lengths in the half hard condition, an ideal temper for cold bending and forming. Mexflow Tubes can be easily bent on an appropriate bending machine for 6 to 22mm O.D. sizes, with a bending spring. Its ease of manipulating and relatively light weight, combined with its ability to withstand high internal pressure makes Mexflow the ideal products for most hot and cold water, central heating and gas services installations.

Copper Tubes offered by us are general-purpose copper tubes that are used for above ground services. These are ideal for drinking water, central heating, sanitation, hot and cold water, industrial & medical gas transportation, various engineering.

As per BS EN 1057-R220 (Previous Designation BS 2871: Part 1: Table Y) Supplied as either 6m long half-hard straight lengths, or annealed 25m or 23m long coils. With a wall thickness approximately 1.5 times thicker than "Mexflow", it is the ideal product for underground applications. The extra wall thickness also allows its use on certain pressurized stem installations with a maximum working temperature of 65°C. These copper tubes are recommended for use on underground services and are also suitable for: drinking water, central heating, sanitation, gas, and various engineering applications. Mexflow Copper Pipes are available with IBP Conex fittings for the complete Copper Plumbing solution.
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Copper Tubes ?

    country-ico

    We will contact you soon !

    Nishit Morakhia

    (Director)

    Mehta Tubes Limited

    Linghi Chetty Street, Chennai, Tamil Nadu, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us